Forged Pistons Turbo

Forged piston and rings set 82mm Fiat/Lancia inline 5cyl 20V. This product data sheet is originally written in English. For Lancia / Fiat inline 5 cyl 20V engines. Fiat 175 / Bravo HGT Turbo / Coupe. Nominal bore diameter: 82mm. Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder) Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm Compression height: 32.40mm. Dish volume: 21cc Pin offset: 1.10mm. Material: Forged aluminum 4032 T6. Average piston weight (unit, without pin): 306g (10.79 oz). Innovative high performance piston skirt design that provides: 1. Smaller piston to bore clearance 2. Better ring seal 4. Durability Features: Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions. Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal. Pin oil lubrication by broaches and oiler to reduce friction and increase durability. Super A Piston Pin (63.45mm) – 5pcs set Dimensions: 63.45mm x 20mm length x O. Average unit weight: 116g (4.09 oz) Rated for 1.000hp Made from special steel alloys that combines optimal mass with high resistance. Piston rings 82mm setContains 01 complete set for 5 cylinder engine. Compatible with SPA Super A, with 1.5mm / 1.5mm and 2mm channels. Ring thickness:1st ring 1.5mm – Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. With DLC (Diamond-Like Carbon) treatment, which is the application of carbon particles, whose physical and chemical properties are very close to those of the diamond, providing greater resistance to the material and reducing the friction of the surface, which significantly reduces friction when working against other surfaces. 2nd ring 1.5mm – Made of cast iron. 3rd ring 2.0mm – Manufactured in 3 pieces, which guarantees easy maintenance, better stability in the control of the oil film and improves the oil removal through the piston lubrication holes, as it has a better area for displacing this oil. 175 / Bravo HGT Turbo / Coupe. Recommended bore to piston to bore clearance: 0.08mm (For nitrous or extreme applications, consult your builder). Piston ring grooves: 1.5 mm / 1.5 mm / 2.0mm. Compression height: 32.40mm. Pin offset: 1.10mm. Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions. Super A Piston Pin (63.45mm) – 5pcs set. Dimensions: 63.45mm x 20mm length x O. Average unit weight: 116g (4.09 oz). Rated for 1.000hp. Made from special steel alloys that combines optimal mass with high resistance. Piston rings 82mm set Contains 01 complete set for 5 cylinder engine. Ring thickness: 1st ring 1.5mm – Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. 10-100 PSI Fuel pressure regulator. T4 Manifold 2 bolt type Wastegate Adapter 45 degree flange. VW syncro Audi 80 90 100 4000 rabbit 1.8 8v underdrive Pulley – RED. VR38DETT Nissan GTR R35 6.496 165mm x 23mm Super A forged con rod set with 7/16. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Engines & Engine Parts\Pistons & Rings”. The seller is “spa_turbo” and is located in this country: US. This item can be shipped worldwide.

• Brand: SPA Turbo